ENGINEERING & COMPONENT SUPPLY
CNC.
AUTOMATION.
MOTION.
Precision Machine Industries (PMI) provides CNC machine repair, industrial automation support, motion control engineering and component sourcing across Northern Ireland and the Republic of Ireland.
Whether production has stopped, a component needs replacing or you are planning your next machinery project, put practical electrical, mechanical and software expertise behind the work.
From investigating an intermittent fault to commissioning a machine at a new site, PMI brings together knowledge of controls, electrical systems and machinery to understand what your equipment needs.
Get specialist help with recurring alarms, positioning problems, homing faults and machines that stop during production.
We trace the issue through the controls, drives, feedback, machine signals and mechanical systems to identify the cause and focus the repair work where it is needed.
Specialist PLC and HMI fault finding, servo drive diagnostics, machine sequence investigations and industrial network support, including EtherCAT and PROFINET.
If the PLC is running but the machine will not move, a servo drive will not enable or devices keep losing communication, PMI investigates the software, signals and connected equipment behind the fault.
Give developing problems attention and plan maintenance around production with machine servicing, condition inspections and investigation of recurring faults.
We use your equipment’s operating pattern, condition and service history to agree the work and a practical downtime window.
Installing new or second-hand machinery? PMI supports machine setup and engineering commissioning, including the controls, connected equipment and operating sequence.
Plan the installation around your site services, machine requirements and intended production use, with practical engineering knowledge behind the work.
Relocate machinery within your factory or between sites with practical knowledge of how it needs to operate after the move.
PMI undertakes decommissioning, dismantling and removal, with reinstallation and commissioning planned where required. Specialist lifting, haulage and electrical disconnection are subcontracted within the agreed scope.
Servicing, fault diagnosis, repair and overhaul for Busch and Becker vacuum pumps.
Speak to PMI about reduced vacuum, overheating, unusual noise or vibration, and pumps stopping unexpectedly. We assess the pump alongside its installation and the machinery it supports.
Source automation components, CNC parts and tooling with practical engineering knowledge behind the choice.
Search by manufacturer part number, explore our product categories or send us the equipment details and application. We consider how a component fits into the machine, including its interfaces, configuration and connected equipment.
Servo drives and motors, PLCs, HMIs, EtherCAT and remote I/O, industrial PCs, variable-frequency drives, cables and accessories.
Whether you have an exact replacement reference or need help identifying the requirement, PMI brings component sourcing and machinery knowledge together.
Cutting tools, tool holders, workholding, measuring equipment and workshop supplies for CNC woodworking and metal machining.
Explore milling tools, router cutters, inserts and other tooling, or send us the details of the job and the items you need. Our supplier relationships include Omega Products and Sistemi Klein.
A discontinued PLC, drive, HMI or I/O module can put an otherwise useful machine at risk.
PMI investigates sourcing and replacement options, considering the original component, its role in the machine and the engineering required to use an alternative.
Already know what you need? Send the complete manufacturer part number and required quantity. If you are still identifying the component, a clear label photograph and the machine details give us a useful starting point.
Buy online where purchasing is available, or request a quotation for your requirement.
When obsolete controls, recurring faults or operational limitations are holding a machine back, PMI helps you assess the options for modernisation.
We review the mechanical condition, CNC controls, PLCs, drives, motors, feedback and communications to compare targeted improvements, partial control upgrades and a wider retrofit.
The aim is a practical plan for the machine’s future, with the proposed changes and commissioning requirements understood from the outset.
Explore CNC retrofits & control upgrades
A fault shown on a control screen can involve the drive, motor, feedback, network or mechanical system behind it. Understanding those connections is central to effective diagnosis and sensible replacement decisions.
PMI brings practical experience with:
Our software experience includes TwinCAT, CODESYS, IndraWorks, DriveTop and Siemens STARTER drive software. We apply this knowledge to diagnosing faults, assessing replacement equipment and supporting changes to working machinery.
Manufacturer names describe our equipment experience. PMI provides independent engineering and sourcing support.
From our base in Craigavon, County Armagh, PMI supports woodworking and metalworking manufacturers across Northern Ireland and the Republic of Ireland.
Contact us about a machine breakdown, planned maintenance, component requirement or machinery project. Tell us your site location, production priorities and required timing so we can plan the next step with you.
Explore our service coveragePMI is developing a milling control platform shaped by practical CNC and automation experience.
Explore the project and discuss prospective applications as development progresses.
Explore PMI CNC ControlYes. PMI investigates intermittent faults as well as stopped machinery. Record the alarm, what the machine was doing when it occurred and any recent changes. Fault-screen photographs and notes about when the problem appears help guide the investigation.
Yes. Send clear photographs of the component label, any visible markings and the machine identification plate. Explain what the component does and why it needs attention. PMI can use that information to begin identifying the requirement and discuss the next steps.
Yes. A relocated machine may need its controls, device configuration and interfaces checked against the new installation.
PMI investigates problems such as drives failing to enable, homing faults, communication alarms and machines waiting for signals from equipment that is no longer connected.
Tell us about the fault, component or machinery project.
Include your site location and required timing, with any useful machine details, fault codes, photographs or part numbers. We will review the requirement and discuss the work or sourcing options with you.
Explore our selected CNC tooling, industrial automation components, motion control equipment and engineering products.
Sistemi Klein
Part number X528
